Rocktron Utopia B100 - Manual (Page 23)

23
SPEAKER EXCITER Function
The SPEAKER EXCITER function is included in all presets and provides a realistic approximation
of a miked speaker cabinet for applications involving connecting the UTOPIA B100 directly to a mixing
board, recording system or other full range system.
NOTE: The parameters provided in this function are operational
only when the SPKR XTR parameter under the GLOBAL
FUNCTION is stored UNLOCK, LOCK L or LOCK B.
The PARAMETER SELECT knob will allow you to access these SPEAKER Exciter parameters:
The SPEAKER Exciter parameter allows you to select whether the Speaker Ex-
citer is on for BOTH outputs, on for only the LEFT output or OFF.
The SPEAKER CURV (curve) parameter determines the EQ Curve to be simu-
lated. FLAT, A, B, C and D are available.
The DEFINITION parameter provides changes in the overall upper-mid frequen-
cies of the preset. Accentuates frequencies centered at 3.8KHz
The REACTANCE parameter accentuates low-end frequencies from 20Hz to
80Hz. This can be used to add body and fullness when recording or performing
live to enhance cabinet response.
SPKR XTR
SPKR CURV
DEFINITION
REACTANCE