Rocktron Utopia B100 - Manual (Page 57)

57
Selecting a confi guration:
5 2 1 3 4,6
Step 1 To select a new confi guration, turn the FUNCTION SELECT knob clockwise until
the UTOPIA B100 displays "CONFIG SELECT".
CONFIG SELECT
When a new confi guration is stored into a preset, each of the parameters contained in the
new confi guration that were contained in the previous confi guration will retain the same values.
All new confi guration parameters that were not contained in the old confi guration will be set to
their default value (or their lowest value).
Turn the PARAMETER SELECT knob clockwise to display the current confi gura-
tion.
Step 2
PRE,CHR,DL,REV
into. (If you want to store the selected confi guration into the current preset, skip this
step.)
Press the STORE button a second time to store the selected confi guration into the Step 5
Step 3 Use the PARAMETER ADJUST control to select the desired confi guration.
WA,PRE,DL,REV
Note: The new confi guration will not take effect until it is stored.
Press the STORE button to initiate the store procedure. The UTOPIA B100 display
will alternate between the current preset number/title and "STORE AT PRESET".
Turn the PRESET knob to select the preset you wish to store the new confi guration
29 PRESET TITLE STORE AT PRESET
Step 4
62 PRESET TITLE STORE AT PRESET
selected preset. The UTOPIA B100 will display "STORED" briefl y. Step 6
STORED