Rocktron Utopia B100 - Manual (Page 28)

28
TREMOLO Function
The TREMOLO function is available only in confi gurations displaying "TRE" in the confi guration
title.
The Tremolo effect continuously varies the volume of the signal.
The PARAMETER SELECT knob will allow you to access these TREMOLO parameters:
The TREMOLO IN/OUT parameter determines whether the Tremolo is active or
bypassed for the current preset.
The LOCATION parameter determines whether the Tremolo is located Pre-Re-
verb or Post-Reverb. Most vintage amplifi ers confi gured the Tremolo (or vibrato)
Post-Reverb.
The DEPTH parameter determines the amount of modulation for the Tremolo
signal. Lower DEPTH settings produce more subtle tremolo effects, while higher
settings will result in a more extreme tremolo effect.
The RATE parameter determines the speed at which the tremolo signal modu-
lates (or increases and decreases in volume).
The SHAPE parameter determines the waveshape of the tremolo signal. Select-
ing a different waveshape produces a different tremolo effect.
TREMOLO I/O
LOCATION
DEPTH
RATE
SHAPE