StorCase Technology RJR100 - Manual (Page 3)

RJR100 User’s Guide - Rev. D02 StorCase Technology, Inc.
2
Receiving Frame Rear Panel
Rear Cooling Fan - Fan helps provide ample carrier ventilation.
I/O Connector - The input/output connector provides a standard interface for AT/IDE or
SCSI signals, depending on model.
DC Power Connector - The RhinoJR uses a standard 4-pin power connector to accept DC
power.
SW1 (or S1, depending on model) - Factory-reserved jumper option - Do Not Use!
Chassis Status LED - Provides the following information:
Green = Power ON (and both fans working properly)
Red = Fan Failure (If either carrier or receiving fan fails)
NOTE: An audible alarm will also sound if either of the fans fail.
Front Cooling Fan (Not Shown) - Fan helps provide ample carrier ventilation (located inside
the front of the drive carrier).
NOTE: Front fan may be manually disabled for special applications. Refer to “Front Fan
Alarm Disable SW2 (or S2...)” for further information.