Velodyne Digital Drive Series User Manual
Page 19
Advertising
www.velodyne.com
Digital Drive Series User’s Manual - 13
Figure 3: Introductory Screen
See Figure 3. This the Introductory screen. notice that as you change settings (such as preset, volume, etc.)
they are shown on this screen.
you enter setup mode by pressing menU and entering the code 12345. Upon successful entry of this code, the
system takes you to the eQ Setup screen, as shown in Figure 4.
HINT: You do not need to press MENU to begin entering the setup code. You can begin the 12345 sequence by
pressing the number 1 on the remote.
Advertising