Velodyne Digital Drive Series User Manual
Page 36
Advertising
![background image](/manuals/743106/36/background.png)
www.velodyne.com
30 - Digital Drive Series User’s Manual
20. Continue this process until the “SYSTEM RESPONSE” graph shows a +/– 3 dB response across the
bass frequencies (that is, up to about 120Hz.). Note that this does not necessarily mean a “ruler flat”
response; +/- 3 dB is typical for an optimized response curve.
NOTE: The following steps use the parametric equalizer to achieve room equalization. If you do not wish to use
the parametric eQ feature, skip to step 24.
21. To fine tune the response even further, use the parametric EQ feature. Position the cursor over the EQ
and press the SelecT button. The values for that particular eQ appear on the right hand side of the
screen. The following screen is shown:
Advertising