Velodyne Digital Drive Series - Manual (Page 7)

www.velodyne.com Digital Drive Series User’s Manual - 1
CONGRATULATIONS
congratulations on your purchase of a Velodyne digital drive subwoofer system! digital drive technology,
universally acknowledged as the state-of-the-art in bass reproduction, is the result of years of research and
development, combining advanced Digital Signal Processing (DSP), software, equalizer, audio filter, digital
amplifier, digital servo control, and high-pressure loudspeaker technologies. The result is a new subwoofer
design that takes our traditionally accurate low-frequency sound reproduction to new levels of precision,
eliminates room anomalies, and resolves many tradeoffs that encumber lesser subwoofer products.
This exceptional subwoofer will provide you with years of unparalleled listening pleasure. Enjoy!
BEFORE yOU BEGIN
Please observe the following instructions to insure safe and proper system operation.
Warning!
To prevent fire or shock hazard, do not expose this equipment to rain or moisture. To avoid electrical shock, do
not open speaker enclosure or amp chassis cover. Please observe all warnings on the equipment itself. There
are no user serviceable parts inside. Please refer all service questions to your authorized Velodyne dealer.
Prior to Installation
Please unpack the system carefully! This unit is heavy. Use caution when lifting or moving to avoid injury. Remove
all staples if used to seal the carton as they can scratch the cabinet. Please save the carton and all packaging
materials for future use. Packing this unit in any other carton may result in severe damage when shipping.
Please take a moment to record the serial number and date/location of purchase in the space provided on the
warranty card for future reference or register on-line at www.velodyne.com.
Caution!
This subwoofer has electronics built into the cabinet. Do not place the cabinet next to sources of heat such as
furnace registers, radiators, etc. Do not place the unit near sources of excessive moisture, such as evaporative
coolers, humidifiers, etc. The power cord should be routed in such a way that it will not be walked on, pinched,
or compressed in any way that could result in damaging the insulation or wire.
Regardless of where you install your Velodyne subwoofer, it must remain in an upright position (woofer facing
forward). Using, shipping, or otherwise storing the subwoofer in any other position for an extended period of
time may result in damage to the unit not covered by warranty.
Certain types of televisions are particularly sensitive to stray magnetic fields. If your television produces distorted
colors after installing your subwoofer, simply increase the distance between your television and the subwoofer,
until normal color and operation is returned.
Important Note: Turn your subwoofer off before moving it!