Velodyne Digital Drive Series - Manual (Page 51)

www.velodyne.com Digital Drive Series User’s Manual - 45
APPENdIX B: SUMMARy OF SPECIAL REMOTE COdES
Following are special remote codes and their functions. Unless otherwise noted, the codes are active only on
the cover page.
Function Code description
Self-EQ 3-2-1 Initiates Self-EQ feature. Be sure to connect the microphone
before engaging. Press RESET to cancel prematurely.
After 25 sweeps, the unit saves and resets.
Restore defaults 8-9-0 Restores defaults and resets the subwoofer.
Switch to PAL/SECAM video DOWN ARROW 4 times followed by RESET The unit restarts in PAL/SECAM video mode.
TO restore NTSC mode, restore defaults.
Display serial number UP ARROW 4 times then SELECT Shows the serial number of the unit at the top of the screen.
Restore last saved volume RESET If volume is changed, restores last saved volume.
Show internal test parameters TEST (3 times) Displays several internal software variables, including
ACCGAINH, which is a measure of servo functioning.
Press TEST again to hide.