Velodyne Digital Drive Series User Manual
Page 26
Advertising
www.velodyne.com
20 - Digital Drive Series User’s Manual
7. Use the dd remote control to mUTe the subwoofer.
8. Raise the volume on your receiver/processor until the DD test sweep (a tone that sweeps from 20Hz up
to 200Hz) can be heard from your system’s speakers. Continue to raise the volume until the “SYSTEM
ReSPOnSe” graph on your TV shows the response of your full range speakers (the right hand portion of
the graph) at approximately 76 dB (or a comfortable listening level). This is shown below:
Advertising