Velodyne Digital Drive Series User Manual
Page 35
Advertising
www.velodyne.com
Digital Drive Series User’s Manual - 29
NOTE: The following step shows using the graphic equalizer (using fixed frequencies and Q) to
equalize the room.
19. You may want to further flatten the EQ curve manually. Use the right and left arrow keys to position the
cursor over the EQ you wish to adjust. If you see a peak in the response at, say, 40Hz (this would be
evident in the “SySTem ReSPOnSe” graph), simply navigate the cursor to the eQ that corresponds to
40Hz and use the UP or DOWN arrow keys to “slide” the EQ up or down. An example of this is shown
below:
Advertising