Vortech 2011-2012 6.4L Hemi Challenger User Manual
Page 16
P/N: 4CL020-020 v1.0, 12/02/2014
©2014 Vortech Engineering, Inc.
All Rights Reserved, Intl. Copr. Secured
6
E. Sandwich the power steering pump between
the steel plate and the supercharger mounting
plate, making sure to install the (2) supplied
power steering pump spacers (one pictured).
Secure the power steering pump to the bracket
using the (3) supplied screws & washers. At this
point, tighten the two screws attaching the steel
bracket to the primary mounting plate. (Loosely
installed in Step D.) (See Fig. 5-e)
F. Using the supplied allen-head screw, install the
power steering adaptor block & fittings to the
power steering pump at this time, making sure
not to pinch or damage the o-ring. You may need
to make adjustments to the fittings for proper
clearance. (See Fig. 5-f)
G. Use Fig. 5-g as a visual representation of how the
power steering pump adaptors are supposed to
be clocked once installed on the bracket. Adjust
as necessary.
5.
SUPERCHaRGER MOUNTING PLaTE INSTaLLaTION, CONT’D
P/S PUMP
SPACERS
(ONE SHOWN)
SUPPLIED P/S
PUMP HARDWARE
Fig. 5-e
Fig. 5-f
INSTALL FITTINGS TO PUMP HERE.
ADJUST CLOCKING AS NECESSARY
Fig. 5-g
P/S ADAPTOR FITTINGS