Vortech 2005-2009 Ford 4.6L 3V Mustang GT Air-Air Cooler - Manual (Page 15)

P/N: 8N020-160
© 2008 Vortech Engineering
All Rights Reserved, Intl. Copr. Secured.
29DEC08v1.0(8N020-160v1.0)
7
Fig. 3A-a
Fig. 3A-b
Fig. 3A.c
3. CHARGE AIR COOLER INSTALLATION
Fig. 3A-d
10mm HeAded
BoltS
PHilliPS-
HeAd SCReWS
SPlASH
PAnelS
3A. BUMPER COVER AND SPLASH PAN
1. Raise the vehicle with a floor jack and set
on jack stands.
2. Remove the seven 5.5mm headed screws
retaining the lower splash panel. (See
Fig. 3A-a.)
3. Remove the six Phillips-head screws (3
each side) on the lower portions of the
plastic inner fender liners. (See Fig.
3A-b.)
4. Remove the five plastic clips retaining the
front portion of the fender liner. Both sides
need to be removed. (See Fig. 3A-c.)
5. Remove the four 10mm nuts (2 each
side) retaining the bumper cover to the
fenders. (See Fig. 3A-d.)