Vortech 2005-2009 Ford 4.6L 3V Mustang GT Air-Air Cooler User Manual
Page 23
P/N: 8N020-160
© 2008 Vortech Engineering
All Rights Reserved, Intl. Copr. Secured.
29DEC08v1.0(8N020-160v1.0)
15
Fig. 3D-a
4.5" x Ø1" HOSE
(TRIM TO FIT)
TO DISCHARGE
TUBE
15" x Ø1" HOSE
(TRIM TO FIT)
TO MANIFOLD PRESSURE/VACUUM
#16 HOSE CLAMPS
BYPASS
VALVE
TO INLET
DUCT
1.
Cut a piece of the supplied 1" heater hose
4.5" long and a piece 15" long.
2.
Attach the 4.5" piece of hose to the inlet
of the by-pass valve, securing it with a
#16 hose clamp.
3.
Secure the 15" piece to the by-pass valve
discharge using a #16 hose clamp.
4.
Attach the open end of the 4.5" hose to
the by-pass port on the cast discharge
duct and secure using a #16 hose clamp.
The open end of the 15" long hose will be
attached to the inlet duct in a later step.
(See Fig. 3D-a, 3D-d.)
3D. COMPRESSOR BYPASS VALVE #2 ASSEMBLY INSTALLATION
(2005-2006 Model Only)