Vortech 2005-2009 Ford 4.6L 3V Mustang GT Air-Air Cooler User Manual
Page 45
P/N: 8N020-160
© 2008 Vortech Engineering
All Rights Reserved, Intl. Copr. Secured.
29DEC08v1.0(8N020-160v1.0)
37
Fig. 3J-i
Fig. 3J-h
Fig. 3J-j
tRiM FAn SHRoud AS needed
FoR HoSe CleARAnCe
9.
Modify the small hose removed from the
factory coolant overflow reservoir. By cut-
ting the "S” bend off the hose end. (See
Fig. 3J-h.)
10. Install a 3/8" union and a #17 stepless
clamp. Secure the clamp. Using a length
of 3/8" (approximately 40" long) hose that
is provided, secure the hose to the union
with a #17 stepless clamp. (See Fig.
3J-i.)
11. Route the overflow hose across the radia-
tor and under the radiator retaining brack-
et to the 1/4"NPT x 3/8" hose barb fitting
in the coolant reservoir securing with a
clamp. (See Fig. 3J-j.)
3J. ENGINE COOLANT RESERVOIR INSTALLATION
(2007-2009 Model Only), cont’d