Vortech 2005-2009 Ford 4.6L 3V Mustang GT Air-Air Cooler User Manual
Page 27
P/N: 8N020-160
© 2008 Vortech Engineering
All Rights Reserved, Intl. Copr. Secured.
29DEC08v1.0(8N020-160v1.0)
19
3E. CHARGE AIR COOLER CORE INSTALLATION, cont'd
(2007-2009 Models Only)
Fig. 3E-c
Fig. 3E-d
SHoRt endS oF 90°
elBoWS PRoVided
FittinG RotAted toWARd
FRont oF VeHiCle
2.
Loosely install the short ends of the two
90° rubber elbows onto each end of the
charge cooler using the supplied #48
hose clamps. (See Fig. 3E-c.)
3.
Using the Ø3" x 2.75" reducer sleeve and
clamps, loosely attach tube “A” to the
supercharger’s discharge. (See Fig.
3E-c.)
NOTE: For better duct clearance, rotate the
power steering return fitting so that it
points to the front of the vehicle. Use care
not to damage the fitting or hose. If nec-
essary, rotate the power steering line from
the rack to the radiator closer to the
frame. (See Fig. 3E-d.)