Vortech 2005-2009 Ford 4.6L 3V Mustang GT Air-Air Cooler User Manual
Page 38
Advertising
P/N: 8N020-160
© 2008 Vortech Engineering
All Rights Reserved, Intl. Copr. Secured.
29DEC08v1.0(8N020-160v1.0)
30
7.
Attach the rear mounting bracket to the
strut tower with the 6mm x 20mm long
screws and washer provided. (See
Fig.3I-f.)
8.
Attach a length of 3/4" hose (approxi-
mately 3') to the 3/4" bung on the front of
the coolant reservoir. Route the hose to
the 3/4" outlet on the thermostat housing
secure the hose with the clamps provid-
ed. (See Fig. 3E-g.)
Fig. 3I-f
FACtoRy
GRound StRAP
Fig. 3I-g
3/4" HoSe AttACHed to
tHeRMoStAt HouSinG
3I. ENGINE COOLANT RESERVOIR INSTALLATION
(2005-2006 Models Only)
NOTE: Reinstall the factory ground wire with one
of the 6mm screws and washers.
Advertising