Vortech 2005-2009 Ford 4.6L 3V Mustang GT Air-Air Cooler - Manual (Page 49)

P/N: 8N020-160
© 2008 Vortech Engineering
All Rights Reserved, Intl. Copr. Secured.
29DEC08v1.0(8N020-160v1.0)
41
5. FINAL CHECK
A. Check all fittings, hose and clamps for
tightness and leaks. Make sure all wires
and lines are properly secure with clamps
or tie-wraps.
B. Make sure all wires and hoses are routed
away from hot, moving or sharp objects.
C. Custom Tuning: This kit requires custom
ECM calibration before the vehicle is to be
driven at any throttle opening greater than
50%. Calibration by a competent tuner
with a wide band 02 sensor and timing
monitoring equipment is required.
D. Test drive the vehicle.
E. Always listen carefully for engine detona-
tion. Discontinue heavy throttle usage if
detonation is heard.
NOTE: Do not attempt to operate the vehicle until ALL
components are installed and ALL operations are
completed including the final check.