Vortech 2007-2009 FORD GT500 OEM POWER PACK UPGRADE - Manual (Page 11)

DP/N: 007125v1.0
© 2010 Vortech Engineering, LLC
All Rights Reserved, Intl. Copr. Secured.
27AUG2010 GT500 OEM POWER PACK
6
E. Using the 15/16” wrenches/sockets, slowly drive
the new pulley onto the supercharger until the
washer seats the new pulley flush to the super-
charger pulley shaft. You will know it is flush when
the new pulley will not go in any further. (See
Figure 2-d)
F. Verify the new pulley is flush to the supercharger
pulley shaft as shown. (See Figure 2-e)
G. Re-insert the plastic cap into the supercharger
pulley shaft.
2. NEW SUPERCHARGER PULLEY INSTALLATION, CONT’D
Fig. 2-d
Fig. 2-e