Vortech 2007-2009 FORD GT500 OEM POWER PACK UPGRADE - Manual (Page 13)

DP/N: 007125v1.0
© 2010 Vortech Engineering, LLC
All Rights Reserved, Intl. Copr. Secured.
27AUG2010 GT500 OEM POWER PACK
8
C. Lower idler assembly below the supercharger
snout and mount onto the previously removed
water manifold screws. Use a 5mm Allen key to
tighten the screws. (See Figure 3-e & 3-f)
D. Have an assistant pry the belt tensioner to install
the belt. While the assistant holds the tensioner,
adjust the idler pulley so that the belt runs parallel
with in ¼” of itself under the supercharger pulley.
Tighten the M12 bolt using a 19mm Socket. (See
Figure 3-g)
3. AUXILIARY IDLER PULLEY INSTALLATION, CONT'D
Fig. 3-e
Fig. 3-f
Fig. 3-g