Vortech 2007-2009 FORD GT500 OEM POWER PACK UPGRADE - Manual (Page 4)

DP/N: 007125v1.0
© 2010 Vortech Engineering, LLC
All Rights Reserved, Intl. Copr. Secured.
27AUG2010 GT500 OEM POWER PACK
iii iii
VORTECH OEM POWER PACK UPGRADE
Installation Instructions
2007-2009 FORD GT500
Before beginning this installation,
please read through this entire instruction booklet
The Vortech 2007-2009 FORD GT500 OEM Power Pack upgrade was designed specifi-
cally for use on 2007-2009 Ford Mustang Shelby GT500 vehicles equipped with the
OEM supercharger to support applications with increased horsepower over the OEM
design. As with any power enhancing product, this unit is intended for use on healthy,
well-maintained engines. Vortech Engineering is not responsible for engine damage.
Installation on new vehicles will not harm or adversely affect the break-in period so long
as factory break-in procedures are followed.
For best performance and continued durability, please take a note of the following key
points:
1. Use only premium grade fuel 91 octane or higher (R+M/2).
2. Always listen for any sign of detonation (pinging) and discontinue hard use (no
boost) until problem is resolved.
TOOL & SUPPLY REQUIREMENTS:
• 15/16” wench
• 9/16” wrench
• 8mm socket, 1/4” drive
• 10mm socket, 1/4” drive
• 13mm socket, 1/4” drive
• 15/16” socket, 1/2” drive
• 19mm socket, 1/2” drive
• 1/4” drive ratchet
• 1/4” drive, 3” extension
• 3/8” drive breaker bar
• 1/2” drive breaker bar
• 5/32” Allen
• 2.5mm Allen
• 5mm Allen
• 5/16 Nut Driver
• Flat screw driver or upholstery tool
• Moly-based grease
• Utility Knife