Lenco CR-2003 User Manual
Page 28
Press WPS key on the remote control or select the WPS
network connection mode. Enter it go to press the
WPS/QSS button on your router within 120 seconds. The
connection between the router and Lenco CR-2003 will
then be configured automatically.
Manual Configuration
You can choose DHPC (which IP assigned automatically) or
manually input IP address for wireless network connection.
When you select manual setting for wired connection, the
followings have to be entered:
1. SSID (the name of Access Point);
2. IP Address;
3. Subnet Mask;
4. Default Gateway;
5. Preferred DNS Server;
6. Alternate DNS Server.
You may choose (Manage) specific network if you have
setup more than one network connection within an area.
Check Network when Power On
Enable / disable WiFi network.
When you enable the WiFi network, the system will
automatically search the available AP. Select you required
AP.
28