Lenco CR-2003 User Manual
Page 48
another station.
3. The link of the station is changed
or the station no longer transmits –
ask the provider for information.
4. The link of manual added station
is not correct, make sure it is
correct and re-enter.
Hiss in FM mode.
1. Check/move the FM antenna.
2. Move the radio.
1. Switch on the alarm.
2. Due to the volume setting, refer
to the solutions of “No sound”.
3. The source of alarm was set to
be station but there is no network
connection. Change the source of
alarm or reconfigure the
connection.
Alarm does not
work.
1. Check the connection of the
network, CR-2003 and your device
need to be in the same network;
and test if the network in good
condition.
2. Make sure the settings on your
device are correct.
Unable to do DLNA
streaming.
Electro-Magnetic
Interference.
1.The normal function of the
product may be disturbed by strong
Electro-Magnetic Interference. If so,
simply reset the product to resume
normal operation by following the
instruction manual. In case the
function could not resume, please
use the product in other location.
System freezes
suddenly.
1. The radio is overloaded, reboot
the unit.
48