Lenco KH-858 - Manual (Page 15)

Set Radio Region:

To change radio region, tap icon, and then tap “CHN / JPN / ERU / USA” you want.
Note:

CNH = China, JPN = Japan, ERU = Europe, USA = USA

All stored stations may be deleted when every time the region has set or changed.
Tune Station:
You can tune the radio stations by using “Auto Search” or “Manual Search”.
Auto Search and Save Station:

Tap icon to enter to auto search and auto preset mode. The radio will searching stations in
the range of frequency “76 – 92MHz / 87 – 108MHz”, all found radio stations will be stored
into “Channel List” table to use. The radio search will stop and show the first received radio
station to listening.
Manual Search and Save Station:

Tap icon to enter to manual search mode.

To tune your desired radio frequency, tapping or icon to change the frequency
Down or Up manually. (0.1MHz by down or up)

Once you desired radio frequency have selected, the station is receiving, by using manual
search function, then tap icon to enter save channel mode. A save channel dialog box
appears to confirm.

Tap “Ok” to save the receiving channel at “Channel List” table to use. Tap “Cancel” to abort.

Tapping or icon to change the frequency to tune and save another desired radio
frequency.
Note: Total 20 stations, CH01 – CH20, can be preset in channel list for use.
Use Channel List and Change Next Station

Tap icon to show all saved radio frequency channels by “Auto Search” and “Manual