Altera SDI II MegaCore User Manual
Page 88
Date
Version
Changes
• Added information for multi standard support including 6G-SDI and
12G-SDI.
• Added the multi standard (including 6G-SDI and 12G-SDI) informa‐
tion for the following signals:
•
tx_enable_ln
•
tx_std
•
tx_datain
•
tx_datain_valid
•
tx_ln_b
•
tx_dataout
•
tx_dataout_valid
•
tx_vpid_byte(1-4)_b
•
rx_std
•
rx_dataout_valid
•
rx_format
•
rx_ln_b
•
rx_vpid_byte(1-4)_b
•
rx_vpid_checksum_error_b
• Added information that the following signals are not applicable for
Arria 10 devices:
•
rx_coreclk
•
rx_coreclk_hd
•
rx_clkin
•
rx_clkin_b
•
rx_rst_proto_in
•
rx_rst_proto_in_b
January 2015
2015.01.23 • Updated the resource utilization table for version 14.1.
• Changed the names of the following parameters for receiver options:
• Convert Level A to Level B (SMPTE 372M) changed to Convert
HD-SDI dual link to 3G-SDI (level B).
• Convert Level B to Level A (SMPTE 372M) changed to Convert
3G-SDI (level B) to HD-SDI dual link.
• Edited information about
rx_format
signal, which now reports video
transport format instead of picture format. The signal reports 3G
Level A RGB or YCbCr 4:4:4 format.
A-2
Document Revision History
UG-01125
2015.05.04
Altera Corporation
Additional Information