Altera PowerPlay Early Power Estimator User Manual
Page 40
Figure 3-22: HSDI Worksheet of the PowerPlay EPE Spreadsheet
Table 3-12: HSDI Worksheet Information
Column Heading
Description
TX/RX Module
Specify a name for the module in this column. This is an
optional value.
Data Rate (Mbps)
Enter the maximum data rate in Mbps of the receiver or
transmitter module.
# of Channels
Enter the number of receiver and transmitter channels
running at the above data rate. This number must be an
integer value from 0 to 156.
Serialization Factor/ Deserialization Factor
Enter the number of parallel data bits for each serial data
bit. This number must be an integer value from 1 to 10.
Toggle %
Enter the average percentage of toggling on each clock
cycle. The toggle percentage ranges from 0 to 100%. The
default toggle percentage is 50%.
3-30
HSDI Worksheet
UG-01070
2015.01.20
Altera Corporation
PowerPlay Early Power Estimator Worksheets