N engine oil selection, Oil grade: ilsac multigrade engine oil, Recommended viscosity :sae 5w-30 – TOYOTA 2011 Yaris Sedan User Manual

Page 351

Advertising
background image

342

6-1. Specifications

Lubrication system

n

Engine oil selection

“Toyota Genuine Motor Oil” is used in your Toyota vehicle. Use Toy-
ota approved “Toyota Genuine Motor Oil” or equivalent to satisfy the
following grade and viscosity.

Oil grade: ILSAC multigrade engine oil

Recommended viscosity :SAE 5W-30

SAE 5W-30 is the best choice for
good fuel economy and good
starting in cold weather.

If SAE 5W-30 is not available,
SAE 10W-30 oil may be used.
However, it should be replaced
with SAE 5W-30 at the next oil
change.

The 5W portion of the oil viscosity rating indicates the characteristic of the
oil which allows cold startability. Oils with a lower value before the W allow
for easier starting of the engine in cold weather.

The 30 in 5W-30 indicates the oil viscosity when the oil is at its operating
temperature. An oil with a higher viscosity may be better suited if the vehi-
cle is operated at high speeds, or under extreme load conditions.

Oil capacity
(Drain and refill
-reference)

With filter
Without filter

3.9 qt. (3.7 L, 3.3 Imp.qt.)
3.6 qt. (3.4 L, 3.0 Imp.qt.)

Outside temperature

Advertising
This manual is related to the following products: