Subaru 2011 Impreza WRX - Manual (Page 114)

Black plate (114,1)
北米Model "A1110BE-C" EDITED: 2010/ 12/ 17
2-24
Keys and doors
! Locking the passengers’ windows
1) Lock
2) Unlock
Push the lock switch. When the lock
switch is in the
“LOCK” position, the
passengers ’ windows cannot be opened
or closed.
Push the switch again to cancel the
passengers
’ window locking.
! Passengers’ side switches
1) Open
2) Close
To open:
Push the switch down and hold it until the
window reaches the desired position.
To close:
Pull the switch up and hold it until the
window reaches the desired position.
When the lock switch on the power
window switch cluster, located on the
driver
’s side door, is in the “LOCK”
position, the passengers ’ windows cannot
be operated with the passengers ’
switches.
! Initialization of power window (type
A)
If the vehicle ’s battery is disconnected due
to situations such as battery or fuse
replacement, the following functions are
deactivated.
. One-touch auto up/down function
. Anti-entrapment function
Initialize the power window using the
following procedure to reactivate these
functions.
1. Close the driver
’s door.
2. Turn the ignition switch to the “ON”
position.
3. Open the driver
’s side window halfway
by pushing down the power window
switch.
4. Pull up the power window switch and
close the window completely. Continue
pulling up the switch for approximately 1
second after the window is closed com-
pletely.