Clutch fluid (mt models) – Subaru 2011 Impreza WRX User Manual

Page 380

Advertising
background image

Black plate (386,1)

北米Model "A1110BE-C" EDITED: 2010/ 12/ 17

11-26

Maintenance and service

clean water. For safety, when
performing this work, wearing
eye protection is advisable.

. Brake fluid absorbs moisture

from the air. Any absorbed moist-
ure can cause a dangerous loss
of braking performance.

. If the vehicle requires frequent

refilling, there may be a leak. If
you suspect a problem, have the
vehicle checked at your SUBARU
dealer.

CAUTION

. When adding brake fluid, be care-

ful not to allow any dirt into the
reservoir.

. Never splash the brake fluid over

painted surfaces or rubber parts.
Alcohol contained in the brake
fluid may damage them.

. Be careful not to spill brake fluid

when adding it. If brake fluid
touches the exhaust pipe, it may
cause a bad smell, smoke, and/or
a fire. If brake fluid gets on the
exhaust pipe, be sure to wipe it
off.

& Recommended brake fluid

Refer to

“Fluids” F12-9.

CAUTION

Never use different brands of brake
fluid together. Also, avoid mixing
DOT 3 and DOT 4 brake fluids even if
they are the same brand.

Clutch fluid (MT models)

& Checking the fluid level

Check the fluid level on the outside of the
reservoir. If the level is below

“MIN” level

mark, add the recommended clutch fluid
to

“MAX” level mark.

Use only clutch fluid from a sealed
container.

WARNING

Never let clutch fluid contact your
eyes because clutch fluid can be
harmful to your eyes. If clutch fluid
gets in your eyes, immediately flush
them thoroughly with clean water.
For safety, when performing this
work, wearing eye protection is

Advertising