Subaru 2011 Impreza WRX User Manual
Page 284
Black plate (288,1)
北米Model "A1110BE-C" EDITED: 2010/ 12/ 17
7-20
Starting and operating
The auto mode has 3 modes as follows.
Mode
Operation
AUTO [+]
This mode emphasizes traction
control and strengthens the
limitation of differential action
that is suitable for driving on
slippery roads for vehicle stabi-
lity.
AUTO
This mode is suitable for most
driving situations.
AUTO [
−]
This mode is suitable when you
seek quick response from the
steering wheel and smooth
driving.
! Mode setting method
In most situations, it is recommended that
the
“AUTO” mode is selected.
Push the control switch forward to select
the
“AUTO [+]” mode. After setting the
mode,
“
” on the combination meter
illuminates.
Pull the control switch rearward to select
the
“AUTO [−]” mode. After setting the
mode,
“
” on the combination meter
illuminates.
When the
“AUTO [+]” mode is selected,
pull the control switch rearward to change
to the
“AUTO” mode. When the “AUTO
[
−]” mode is set, push the control switch
forward to change to the
“AUTO” mode.
& Manual mode
In the manual mode, you can use the
center differential control switch to adjust
the initial LSD torque as desired. When
this mode is selected, the
“AUTO” indica-
tor light on the combination meter turns
off.