Subaru 2011 Impreza WRX - Manual (Page 226)

Black plate (228,1)
北米Model "A1110BE-C" EDITED: 2010/ 12/ 17
5-38
Audio
& Connectable iPod ® models
Model Firmware version
iPod ®
5G 1.3
5.5G 1.3
classic 1G 2.0.4
classic 2G 2.0.4
nano 2G 1.1.3
nano 3G 1.1.3
nano 4G 1.0.4
nano 5G 1.0.2
touch 1G 3.1.2
touch 2G 3.1.2
iPhone ®
1G (GSM) 3.1.2
3G 3.1.2
3G S 3.1.2
CAUTION
Do not connect an iPod ® other than
the previously stated models. Doing
so may result in a malfunction or,
depending on conditions, cause a
fire.
NOTE
. iPod ® is a registered trademark of
Apple Inc.
. You are only permitted to personally
copy and play copyright-free material
or material that is legally permitted to
be copied and played by using an
iPod
® and iTunes. Copyright infringe-
ment is prohibited by law.
. To check the firmware version of an
iPod
® , connect it to a computer and
check the device manager. For further
information, see the User
’s Guide that
comes with the iPod ®
. To update the firmware version of an
iPod
® , visit the Apple Inc. website.
. Depending on the model and firm-
ware version of an iPod
® , it may not
work properly or not operate at all.
& Connecting USB storage de-
vice / iPod ®
CAUTION
. If the data stored in an iPod ® is
deleted while it is connected to
the in-vehicle system, the data
cannot be recovered.
. Do not store an iPod ® in the
vehicle. If an iPod ® is left in the
vehicle for a long period of time,
it may be deformed, discolored
or damaged by high temperature.
NOTE
. Even if a USB storage device or
iPod
® is connected, it cannot be played
unless the “CD/AUX” button is
pressed.
. A movie cannot be played while an
iPod
® is connected.
. While an iPod ® is connected, the
iPod ® cannot be operated using the
click wheel on the iPod ® . However,
touch panel equipped models can be
operated.
. When using an iPod ® by connecting
it to in-vehicle equipment, the order of
the list items displayed on the in-
vehicle equipment may be different
from that on the iPod
® . However, this
does not indicate a malfunction.
. An iPod ® battery that is connected
to in-vehicle equipment will be charged
when the ignition switch is in the
“ON”
or “Acc” position. However, activation
of the iPod ® may be delayed if the
battery charge of the iPod ® is low.
. If an iPod ® does not activate after
operation, disconnect the connection
cable from the iPod
® and reset it. For
the resetting procedure, see the User ’s
Guide that comes with the iPod ® .