Belt pack transmitter, Af 4-pin input connection methods, Operating instructions – MIPRO act707d(2ce150)b User Manual
Page 12
BELT PACK TRANSMITTER
BELT PACK TRANSMITTER
2 0
21
3. AF 4-PIN INPUT CONNECTION METHODS
(1) 2-Wire Electret Condenser Microphone Capsule
(2) 3-Wire Electret Condenser Microphone Capsule
(3) Dynamic Microphone
(4) Electric Guitar
(5) Line-in ( Impedance 8K
ATT. 10dB)
Ω
AUDIO
SHIELD
4
3
2
1
PIN
SHIELD
AUDIO
BIAS
3
4
PIN
1
2
AUDIO
SHIELD
1
4
3
2
PIN
SHIELD
AUDIO
3
2
1
PIN
4
3
2
1
SHIELD
AUDIO
1
3
4
2
PIN
1
3
4
2
1
3
4
2
1
3
4
2
1
3
4
2
1
3
4
2
1
3
4
2
OFF
ON
BATT.
LOW
2. OPERATING INSTRUCTIONS
1. Toadjust GT/MTSwitch (10), and Gain Control (8), simply push down both
snap locks on the sides of battery cover and flipit backwardsto expose the
adjustment panel.
2. Before power on, ascertain if same channel (7) was set up for both receiver
and microphone. If notadjust to same channel accordingly.
3. The LED indicator flashes briefly when power on indicating normal battery
status. Ifno flash occurs it has either no battery, the battery is drained or
installed incorrectly. Changeaccordingly.
4. Plug the microphone connector intothe input jack (1) and tighten the
connector screwby clockwisedirection as shownin (Fig. 2).
(Fig.2)
Lavalier
Headset
Pleaseaimof
thefillister
andinsertthe
connector
CapsuleConnector
1
3
4
2