Applied Motion STR4 - Manual (Page 24)

24
STR4/8 Hardware Manual 920-0030J
5/12/2015
Motor Outlines
Reference Materials
Self Test
If you are having trouble getting your motor to turn, you may want to try the built-in self test.
Anytime switch 8 is moved to the ON position, the drive will automatically rotate the motor
back and forth, two turns in each direction. This feature can be used to confirm that the motor
is correctly wired, selected and otherwise operational.
8
ON
8
OFF
SELF TEST
HT17 Outline Drawing
L
MOTOR LENGTH(L)
HT17-068
33±1 mm
HT17-071 39±1 mm
HT17-075 47±1 mm
HT17-268 33.3 mm MAX
HT17-271 39.8 mm MAX
HT17-275 48.3 mm MAX
ADD ‘D’ TO END OF PART NUMBER TO ADD
REAR SHAFT AND ENCODER HOLES