Applied Motion STM23C-3CE - Manual (Page 3)

Introduction
Thank you for selecting the Applied Motion Products STM23 Motor+Drive. We hope our dedication to perfor-
mance, quality and economy will make your motion control project successful. If there’s anything we can do to im-
prove our products or help you use them better, please call or fax. We’d like to hear from you. Our phone number
is (800) 525-1609, or you can reach us by fax at (831) 761-6544. You can also email [email protected].
Features
• Programmable, micro-stepping digital Step Motor+Driver in an integrated package
• Operates from a 12 to 70 volt DC power supply
• Operates in velocity or position mode
• Mid-band anti-resonance
• Accepts analog signals, digital signals and RS-232 serial commands
• Step input signal smoothing
• Q programming over Ethernet and Ethernet/IP models
• RS-422/485 communication models
• Optional encoder feedback
• STM23S/Q-2 delivers up to 125 oz-in
• STM23S/Q-3 delivers up to 210 oz-in
• 3 - optically isolated, 5 to 24 volt digital inputs
• Input filtering both hardware and software
• 1 - optically isolated, 30V 40ma digital output
• 1 - 0 to 5V analog input for speed and position control
3
STM23 Hardware Manual
920-0021F
2/14/2012