Applied Motion TSM23C-2CG - Manual (Page 20)

20
Rev. A
920-0082
TSM23C Hardware Manual
3.3.6 Programmable Output Y4
TSM23C motors feature one optically isolated digital output Y4.
The Y4+ (collector) and Y4- (emitter) terminals of the transistor are available at the connector. This
allows the output to be configured for current sourcing or sinking.
Y4 can be set to provide an output frequency proportional to motor speed(tach signal), or to
provide a timing outout (50 pulses/rev), or to indicate whether the motor is in position(static).
Diagrams of various connection types follow.
Do not connect the output to more than 30 volts. The current through the output terminal
must not exceed 100mA.
+
-
Y4+
Y4-
5 - 24
volt DC
Power
Supply
Connecting a Sinking Output
Load
TSM23C
COM
IN
Y4+
Y4-
PLC
Connecting a Sourcing Output
5 - 24VDC
Power Supply
TSM23C
+ -
+
-
5 - 24
volt DC
Power
Supply
Driving a Relay
Y4+
Y4-
relay
1N4935 suppresion diode
TSM23C