AXING SKP 2-10 User Manual
Page 16
Operation Instructions SKP 2-10
Chapter 3: Programming
16
© AXING AG • Swizzerland • Reserving change in design and type
16.02.12
Selection submenu TV standard
The submenu is loaded by means of the CH
/CH
keys.
The TV standard line is then displayed with colored background.
The desired TV standard can be selected by means of the VOL
/ VOL
keys. In BG and DK
standard, additional audio settings can be made. The audio signal is mono in all other standards.
Selection submenu audio mode
After selecting the submenu audio mode by means of the CH
/CH
keys, you can choose between
mono and stereo in the BG or DK standard.
All setting possibilities described above are shown in the following image.
Selection submenu Output Level
After selecting the “Output Level” submenu by means of the CH
/CH
keys, the the modulator can
be changed in 1dB steps by means of the VOL
/ VOL
keys.
20 equals an output level of 105 dBµV. The maximum level decrease is –20dB (equals = 0)..
Selection submenu Fine Tune adjustment
If the output channel does not correspond to the CCIR pattern, the output frequency can be changed and
adjusted in steps of 250 kHz. The adjustment range is +/- 4 MHz.
The setting is done by means of the VOL
/ VOL
keys.
Exit modulator menu
After pressing the EXIT key, the menu is closed and all settings are saved.
3.5.2
Menu language
Select the menu item “Menu language” and confirm with OK.
After selecting this menu item, the menu language can be changed with theVOL
/ VOL
keys.
Fig. 24: Selection in the
modulator menu
Fig. 25: Menu language