AXING SKP 2-10 - Manual (Page 17)

Operation Instructions SKP 2-10
Chapter 3: Programming
16.02.12 © AXING AG • Swizzerland • Reserving change in design and type 17
3.5.3 Exit the configuration
Select the menu item “Exit” and confirm with OK.
After selecting the menu item “Exit”, the programming is ended. All settings are saved.
After exit the programming, the programming selection switch must be set to centre position
3.6 Other functions
Additional settings can be made without starting the main menu..
3.6.1 Setting the audio level
The audio level at the RF output can be adjusted using the VOL     / VOL     keys.
3.6.2 Change program
The received program can be changed according to the program list using the CH  / CH  keys.
The desired program can be selected from the list by means of the CH  /CH  keys.
After pressing the “OK” key, the program is applied. Additional program information can be loaded by
means of the “INFO” key.
3.6.3 Display input signal quality
After pressing the “F1” key, the quality of the input signal is displayed.
The display is closed by pressing “EXIT”
Fig. 26: Exit the configuration
Fig. 27: Setting the audio
level
Fig. 28: Kanalliste
Fig. 29: Quality of the input
signal