CIRCUTOR PowerStudio Series - Manual (Page 54)

PowerStudio
54 User Manual
7.- SETUP
7.1.- PREFERENCES
This option can be used to configure a series of general parameters for the application.
Using this selector, the application language can be selected
Will indicate to the software if an events log should be saved or not. To save
system events, a table, with the various activities taking place in the system can be displayed, such as
when a user accesses a SCADA screen or is denied access.
Using this option software property updates can be easily made. This
preference will be explained in more detail in section 7.1.1 Updates.
Allows the mail server to be configured to make it possible to send e-
mails during events (see section 7.9.2.3 Sending Mail)
Here the ‘E-mail address’ of the sender,' and the Mail server address (SMTP) 'should be
indicated and the mail server authentication enabled if necessary.Once configured it is possible to test