CIRCUTOR CEM-C10 series - Manual (Page 16)

4�4�2� READING MODE DISPLAY
The reading mode is activated by a long press on the key.
In reading mode you can:
 View the voltage, current, active power, apparent power and power factor of the
installation.
 View the energies of the partial energy meters.
 Enter the programming menu.
 View the manufacturer information.
The navigation diagram is shown in Figure 7 :
Figure 7: Navigation diagram in reading mode of the CEM-C10�
NB: PC is a short press on the key (< 2 seconds).
PL is a long press ( > 2 seconds).
16
CEM-C10
Instruction Manual