CUE uniCUE - Manual (Page 15)

15
Touch Panel Controllers / Mounting
© CUE, a.s. All Rights Reserved.
Taking Unit Out
Insert a thin screwdriver into each of the two little
holes on the sides of the touch panel and push
until the metal catches get loose. Then you can tilt the upper part of the
touch panel.
Hold the panel upright and pull its bottom part
out. In this position you can tilt the panel to
mount cables. If you need to remove the panel out
completely, hold it upright, push
downwards and pull it out.
Step 1 Step 2
Step 3 Step 4