CUE uniCUE - Manual (Page 20)

20
Touch Panel Controllers / Connecting
© CUE, a.s. All Rights Reserved.
PWR IN
The uniCUE requires power from an external power supply. The standard CUEadapter /30W is delivered with
the unit. Attach the 2-pin connector of the power supply unit to the PWR IN connector located on the rear
panel and attach power cable to a power outlet.
Warning: Use any unit only with the power adapter supplied in the product package. Using another power
supply may damage the unit.
Connector pin out
PWR IN
2-pin 3.5 mm Pin Description
+ G
+ Power +24 VDC
G Ground
OUT 5 V
Connector pin out
PWR OUT
2-pin 3.5 mm Pin Description
+ G
+ Output +5 VDC, max. 1 A
G Ground