CUE uniCUE - Manual (Page 27)

27
Touch Panel Controllers / Download User Application
© CUE, a.s. All Rights Reserved.
Using Admin Web
Steps are
1. Connect touch panel controller to your computer as described in chapter Connecting / CUEnet (LAN)..
2. Run Cue Visual Composer on your PC.
3. Open appropriate project in Cue Visual Composer. It’s necessary to have appropriated touch panel
controller properly inserted and configured.
4. Use tool bar button Final to open Upload and Export Application dialog box.
5. Be sure your touch panel controller is checked.
6. Use button Export All... to export application and store it in file *.cvca.
7. Run the Internet browser on your PC and type in the same touch panel IP address as you see in Cue Visual
Composer project, window Properties / IP address.
8. Go to page System and check current firmware version. In case there is no actual firmware version in
touch panel, upload firmware version that corresponds to firmware version in the Cue Visual Composer
project..
9. Go to page Applications and upload application file *.cvca.
10. Start uploaded application using button Start.
Button Final
Button Export All...