d&b xA-Series - Manual (Page 3)

1. System safety................................................................... 4
1.1. Intended use................................................................ 4
1.2. Load capacity.............................................................. 4
1.2.1. Approved array configurations............................... 4
1.2.2. xA-Series loudspeaker cabinet weights.................. 4
1.3. ArrayCalc / TI 385..................................................... 5
1.4. Operational safety...................................................... 5
2. Rigging concept............................................................... 6
2.1. Tool box....................................................................... 7
2.2. xA-Series rigging components.................................... 7
2.2.1. xA-Series loudspeaker cabinets.............................. 7
2.2.2. Z5413 Flying bar connector plate xA................... 7
2.2.3. Z5414 Flying bar xA............................................... 8
2.2.4. Z5415 Flying bar adapter xA................................ 9
2.2.5. Z5419 Load bar xA................................................ 9
2.2.6. Z5416 Connector plate 10A............................... 10
2.2.7. Z5417 Connector plate 10AL.............................. 10
2.2.8. Z5418 Connector plate xA-SUB.......................... 10
2.2.9. Z5421 Connector plate xA, neg. splay............... 11
2.2.10. Z5420 Load eyebolt.......................................... 11
2.3. Setting the splay angle............................................. 11
2.4. Connector plate hole grids....................................... 13
3. Suspension options...................................................... 15
3.1. Vertical arrays........................................................... 15
3.1.1. Z5415 Flying bar adapter xA.............................. 15
3.1.2. Additional suspension options.............................. 16
4. xA-Series arrays and assembly............................. 17
4.1. xA-Series array configurations................................. 17
4.2. Assembly preparations............................................. 18
4.2.1. Tools required........................................................ 18
4.2.2. Assembly area....................................................... 18
4.2.3. Orientation of the HF section................................ 18
4.3. Vertical arrays........................................................... 18
4.3.1. Horizontal assembly on the ground..................... 18
4.4. Ground stacks........................................................... 20
5. Hoisting the array........................................................ 21
5.1. Safety guidelines....................................................... 21
6. Declarations.................................................................... 22
6.1. Manufacturer's declaration...................................... 22
6.2. Disposal..................................................................... 22
Contents
d&b xA-Series, Rigging manual (1.1 EN) 3