Doremi DCP to ShowVault Conversion Procedure - Manual (Page 21)

Figure 49: 2G RAM Modules
• Gently insert the 2GB modules into the RAM slots. Apply pressure evenly until the
modules snap into place.
• Place the old modules into the packaging for the new modules. Ship these back to
Doremi, along with the Media Block and the AES card.
• Place the unit's lid back on the unit and tighten into place using all of the screws you
saved at the beginning of the procedure.
Figure 50: Screw Locations
SHV.DP.001968.DRM Page 21 Version 1.2
Doremi Cinema LLC Confidential
Screw
Locations
Screw
Locations
Sticker