Doremi DCP to ShowVault Conversion Procedure - Manual (Page 3)

1 Introduction
1.1 Purpose
This document details how to convert a DCP-2K4 to a ShowVault-4. It is presented as a step-
by-step procedure that must have all steps performed properly and in the correct order. This
document also lists the required parts and components that are needed to perform the
conversion.
1.2 Important
CAUTION: The procedure presented in this document must be performed by a qualified
technician ONLY, who is properly grounded according to ESD rules (see Section 3 for
more information).
• This conversion is only for DCP-2K4 units that are fitted with Supermicro X7SBE
motherboards.
1.3 Contact
If in need of help or assistance, please contact Doremi Labs Technical Support at:
USA
• 24/7 Technical Support line: +1-866-484-4004
• Technical Support Email: [email protected]
Europe
• 24/7 Technical Support line: +33 (0) 492-952-847
• Technical Support Link: http://support.doremitechno.org/ticketing
Japan
• Technical Support line: +044-966-4855
• Technical Support Email: [email protected]
Australia ~ China ~ India ~ Indonesia ~ Korea ~ Malaysia ~ New Zealand ~ Philippines ~
Singapore ~ Taiwan ~ Thailand
• Technical Support Email: [email protected]
SHV.DP.001968.DRM Page 3 Version 1.2
Doremi Cinema LLC Confidential