Doremi DCP to ShowVault Conversion Procedure - Manual (Page 7)

• Chassis Revision Number and Serial Number Stickers
Figure 12: Revision Number and Serial Number Stickers
2.3 Required Accessories
The following parts are not necessary for this conversion, but are necessary for the installation
of the ShowVault. Please refer to the manuals found at
http://www.doremilabs.com/support/cinema-support/cinema-manuals/showvault-imb-manuals/
for the specific ShowVault/IMB manual that pertains to your unit.
• PCI-e Cable, 3 Meters long (Doremi Part Number: CBL-PCIe-3M)
Figure 13: PCI-e Cable
• GPIO Cable (Doremi Part Number: CBL-GPIO-IMB-OUT-25)
Figure 14: GPIO Cable
• GPIO Cable (Doremi Part Number: CBL-GPIO-IMB-IN-25)
SHV.DP.001968.DRM Page 7 Version 1.2
Doremi Cinema LLC Confidential