Doremi DSDI-20s - Manual (Page 5)

1 Introduction
1.1 Purpose
This document provides guidance on HDVI-20s, HDVI-20d, XDVI-20 and DSDI-20 devices. It
explains the infrared remote control usage and the On Screen Display (OSD). It also explains the
HDVI-CP graphical user interface (GUI) operations.
Note: HDVI-20s, HDVI-20d, XDVI-20 and DSDI-20 devices will be referred to as “DVI20-
Devices” in this document.
1.2 Presentation
This document is divided into the following sections:
 Section 1: Introduction – Overall presentation of the document
 Section 2: DVI20-Devices Overview – Presentation of the DVI20-devices
 Section 3: Infrared Remote Controller – Usage of the infrared remote controller
 Section 4: Input/Output Settings - Quick Start – Quick start guide to set an input and/or
an output formats
 Section 5: OSD Menus – Presentation of the OSD menus functions
 Section 6: HDVI-CP Application – Presentation of the HDVI-CP software
 Section 7: Firmware Upgrade – Procedure to follow to perform a firmware upgrade
 Section 8: Recommended LCD Monitors
 Section 9: Wiring of a PC to DVI20-Device Cable
 Section 10: DVI20-Devies Specifications
 Section 11: Acronyms
 Section 12: Document Revision History
1.3 Contact Information
If in need of help or assistance, please contact Doremi Labs Technical Services at + 1-818-562-
1101 or email at
[email protected] .
DVI.OM.000262.DRM Page 5 of 33 Version 1.4
Doremi Labs