Future Automation PSE90 - Manual (Page 9)

Installation:
Stage
4
+ ( + ( Page 8 of 17 // email [email protected] tel: 44 0) 1438 833577 fax: 44 0) 1438 833565
PSE90 Flat Screen Electric Wall Mount
Fitting the mechanism to the wall
Once you have decided on the location of your
screen you can fix the wall plate to the wall.
Fixings
-Fix through one of the top holes first
-Using the wall plate as a template, mark
the other holes before drilling into the wall
-Make sure a spirit level is used at all times
to ensure mechanism is always level
It is the installers responsibility to choose
the appropriate fixings when attaching to
the wall and to make sure the mechanism
is safe and secure.
Make sure the wall which the PSE90 is
being mounted to is structurally suitable
Step 1
Step 2
1 - Fix the top 2 screws into the wall.
Keyhole details are 200mm apart,
symmetrical about screen centre
2 - Hang the mechanism on the
screws using the key hole detail at
the top of the wall mounting plate
3 - Continue to secure the
other 6 fixings in place
Maximum head
height of fixings
allowable 5.50mm
Wall Plate
Supporting
Structure
Plaster Board