Paxton Superchargers Small Block Carbureted Ford - Manual (Page 13)

2-1
P/N: 4PFX020-010
©2007 Paxton Automotive
All Rights Reserved, Intl. Copr. Secured
26JAN07 v2.1 UnivSBFCarb(4PFXv2.1)
Section 2
PREPARATION/REMOVAL
2.1 PREPARATION/REMOVAL
A. Disconnect the negative lead from the
battery.
B. Loosen all nuts and bolts that are used to
tension the alternator and power steering
pump V-belts.
C. Remove all of the belts from the accessories.
D. Remove the stock crank pulley and acces-
sories from the side of the engine that the
supercharger will be installed on.
*** NOTE ***
If you have not changed spark plugs in the last
15,000 miles do so prior to the installation of this kit.
E. If the ignition coil is mounted on top of the
intake manifold, it will need to be relocated
to the front of the engine for carburetor
enclosure clearance.
*** NOTE ***
If you are installing a universal supercharger kit,
some of the following instructions may not apply or
may require custom fabrication.