Paxton Superchargers Small Block Carbureted Ford - Manual (Page 29)

9-1
P/N: 4PFX020-010
©2007 Paxton Automotive
All Rights Reserved, Intl. Copr. Secured
26JAN07 v2.1 UnivSBFCarb(4PFXv2.1)
Fig 9-a / Passenger side discharge tube.
('64-'68 Mustang)
Fig 9-c / Passenger side discharge duct.
(1969 351 Mustang)
Fig 9-d / Driver side discharge duct
(1969 351 Mustang)
9.1 AIR DUCTING INSTALLATION
Section 9
AIR DUCTING INSTALLATION
A. Install the supplied air filter onto the super-
charger inlet. Orient for maximum clearance
and tighten clamp.
B. Install the four-bolt flange adapter and gas-
ket onto the enclosure cover using the 5/16-
18 socket head cap screws.
C. Install the correct sleeves and clamps on
each end of the discharge duct. Slide one
end of the discharge duct onto the super-
charger and the other end onto the enclosure
adapter.
Fig 9-b / Driver side discharge duct.
('64-'68 Mustang)
*** NOTE ***
On applications where the discharge of the super-
charger does not line up, try loosening the mounting
bracket bolts that go into the head, re-position super-
charger and tighten all bolts.
D. Install the supplied bypass valve onto the
discharge duct. Install the supplied filter
onto the bypass valve discharge. Orient the
bypass valve for maximum clearance (check
with hood closed).