Pointmaker PVI 65 - Manual (Page 47)

Boeckeler Instruments, Inc. Pointmaker PVI-65 HD/SD-SDI Broadcast Video Marker - Page 37
Section Two: Annotation Menu Annotation Settings
Figure 2-6: Set Brightness dialog
The Brightness Menu appears.
4. Adjust the sliding scale using any of the following methods:
• Move the colored slider by dragging it left or right.
• Click on the plus or minus at each side of the scale to move the
slider in small increments.
• Click on the scale itself to move the slider to the desired location.
Adjust the brightness controls until the marker displays the desired
brightness level.
NOTE: Moving the cursor to the left will decrease brightness. Mov-
ing the cursor to the right will increase brightness. If the brightness is
set too high for the monitor, the markers will smear across the image.
5. Exit the menu system.
Setting a Brightness Level Using the Keyboard
1. Repeatedly press the CHANGE BRIGHTNESS [F10] key until the
marker displays the desired brightness level.
To scroll backwards through the brightness options, press SHIFT +
CHANGE BRIGHTNESS [F10].
NOTE: Brightness selections on the keyboard override any settings
made in the menu system.
SET BRIGHTNESS
O K